Private walkthrough. Enter the access code you were given.
That code is not right.
YYZdata Inc · Prepared for a private conversation · Not for distribution
SIGNALS · WORKPLACE WALKTHROUGH
The lease says 52,000 sq ft. What does the building say?
Signals reads the cameras and systems an occupier already has and measures what is actually used: people, rooms, seats, hours. This walkthrough shows what that evidence looks like for one fictional tenant.
Every number inside is simulated on a fictional tenant, Arden & Pike LLP. The three figures on the right are real industry benchmarks with their sources.
56%
Global average office utilization, 2026
JLL Global Occupancy Planning Benchmark Report 2026
30%
Average meeting-room utilization; when rooms are used, only 40% of seats are occupied
Density, space utilization benchmarks
$150B
Estimated annual cost of unused US office space
Density, derived from CBRE occupancy data
SIGNALS
Arden & Pike LLP · Floors 11-12, Midtown Atlanta · 52,000 sq ft · 310 seats · 24 rooms
SIMULATED DATA
This is a walkthrough of what Signals shows a workplace occupier, run on a fictional law firm. The floor plan, cameras, and every figure are simulated. On a live deployment the numbers come from the tenant's own cameras and booking system, processed on site.
183
People on the floors right now
Peak today 201 at 10:40a
59%
Seat utilization at peak
Tue/Wed run 12 pts higher than Fri
9 of 14
Rooms booked this hour that are actually in use
5 booked rooms are sitting empty
41
Open seats in quiet zones now
Most on 12, northeast benching
Arrival curve, today vs 10-week average
Who is in the building and when. This is the curve a workplace plan should be built on.
Today10-week average
Worth acting on
What Signals would surface to the office lead this morning.
Conference 11-C booked 9a to 5p by a recurring hold, empty since 9:20a.
Recurring holds like this one block 11 room-hours a week.
Floor 12 northeast benching under 20% used before 11a all quarter.
Candidate zone for the sublease study in the Lease evidence tab.
Visitor lobby dwell over 9 minutes twice this morning.
Longest waits cluster Tue 9-10a; reception is single-staffed then.
Floor 12, live zone view
Utilization now, by zone. Green under 40%, amber 40-75%, red over 75%. No cameras inside private offices.
LightModerateBusyNot measured (private)
The booking system knows what is reserved. Measurement knows what is empty.
A room booked until 1:00p but empty since 12:06p can go back on the floor, with the holder given the option to keep it. That single mechanic recovers most of the "no rooms available" complaint without adding a room.
Room
Booking system says
Measurement says
Signals action
Conf 11-A (12)
Booked 10a-12p
7 people, in use
Nothing. Working as booked.
Conf 11-C (10)
Booked 9a-5p, recurring
Empty since 9:20a
Offer release to holder, then floor
Conf 12-B (8)
Booked 11a-1p
Empty since 12:06p
Returned to floor 12:21p
Huddle 12-E (4)
Free
3 people, 47 min
Unbooked use. Counted, not policed.
Board 11-BR (18)
Booked 2p-4p
Not yet started
Watch at 2:15p
Ten weeks of booked vs actually used, all 24 rooms
Hours per week. The gap is the reclaimable capacity.
Room class
Booked hrs/wk
Used hrs/wk
No-show rate
Gap
Large conference (6)
176
121
31%
Mid rooms (10)
252
186
26%
Huddles (8)
118
104
12%
Pattern across ten weeks: the firm does not need more rooms. It needs its large rooms back from recurring holds, and two more huddles. That is a furniture decision, not a lease decision.
Right-size the room mix
Measured meeting sizes vs the rooms they happened in.
Meeting size
Share of meetings
Where they happened
1-2 people
44%
Mostly mid rooms built for 8
3-4 people
33%
Mid rooms, huddles full
5-8 people
17%
Large conference
9+ people
6%
Boardroom, 2 overflow events
Industry backdrop: average meeting-room utilization is about 30%, and occupied rooms average 40% of seats filled (Density). Arden & Pike's measured pattern is the same shape. The fix is smaller rooms, not more square feet.
61%
Peak-day seat utilization, 10-wk
Tuesday, 10a-2p window
146
Seats never over 50% used
Concentrated on floor 12
96 sf
Space actually used per person at peak
Against 168 sf leased per seat
$41.50
Assumed full-service rate, per sq ft
Blue input. Change it in a live deployment.
What the lease pays for vs what the building records
Ten weeks of measurement, both floors, working hours.
Zone
Sq ft
Peak util
Avg util
Reading
Floor 11, attorney offices
14,800
74%
52%
Healthy. Keep.
Floor 11, rooms + commons
11,200
81%
44%
Peaks matter more than average here. Keep.
Floor 12, benching NE
9,600
31%
14%
The sublease candidate
Floor 12, benching SW + focus
10,400
58%
37%
Absorbs NE if consolidated
Floor 12, rooms + pantry
6,000
69%
41%
Keep
The renewal conversation this evidence supports: consolidating floor 12's northeast benching into the southwest zone frees roughly 9,600 sq ft with no measured loss of capacity, worth about $398,000 a year at the assumed $41.50 rate. Ten weeks of measurement, stamped and exportable, is the difference between asking for that and asserting it. (9,600 x $41.50 = $398,400. Simulated arithmetic on simulated measurements.)
Cost per actually-used seat
The metric an occupier advisor can negotiate with.
Leased basis
Measured basis
Seats
310
189 (peak-day used)
Cost per seat / yr
$6,961
$11,418
Sq ft per person
168
96 at peak
The measured column is the honest cost of the status quo. It is also the number that improves fastest when the plan changes. Benchmark: US allotments have compressed toward ~150 sq ft per person (Density).
Attendance shape, 10 weeks
People in the building by weekday, share of seats.
Context: global average utilization is 56% and 70% of employees are now in three to five days a week (JLL, 2026). Arden & Pike's Tuesday peak is the design constraint; Friday is the sublease argument.
How this deployment is configured
The default posture, set with the tenant for each deployment.
Counts, not identities
Signals here measures counts, flow, dwell, and occupancy. Face recognition and individual identification are not configured in this deployment.
You own your data
The measurement record belongs to the tenant, never to us and never to the landlord: queryable, portable, deletable on exit.
Video, your call
By default, frames are processed on hardware on the tenant's premises and no video is stored; what leaves the building is numbers. Retention can be enabled where the tenant wants it.
No private offices
Zones are measured only where the tenant enables them. Private offices are excluded by default.
No emotion or attention inference
Not offered.
Existing cameras
Runs on the camera estate already in the building, with the building owner's authorization in writing as part of every deployment.
Scope is the tenant's call
Everything above is the configured default. Changes to scope are made in writing with the tenant and reviewed against the law of the jurisdictions involved.
What a deployment involves
For a two-floor tenant like the fictional one here.
Week 1
Camera survey, zone map from the floor plan, building authorization.
Week 2
Edge box installed, cameras connected read-only, booking-system connector on.
Weeks 3-12
Measurement runs. The lease-evidence rollup builds itself.
Output
The dashboards in this walkthrough, plus a stamped, exportable utilization record an advisor can take into a negotiation.